Installation Instructions
Dacor | Max. 208V | Max. 240V | Power | |
Model Number | Connected Load | Connected Load | Supply | |
ECS127 |
|
|
| |
|
|
|
| |
MCS127 | 25 Amps | 22 Amps | 208/240V | |
ECS130 | ||||
(5.2kW) | (5.2kW) | |||
| 60Hz, 30A | |||
PCS130 | ||||
|
| |||
|
|
| ||
|
|
|
| |
MCS130 |
|
|
| |
ECS136 | n/a | 29 Amps |
| |
(7.0kW) |
| |||
|
|
| ||
ECS227 |
|
|
| |
|
|
|
| |
MCS227 |
|
|
| |
|
|
|
| |
ECD227 |
|
|
| |
MCD227 |
|
| 208/240V, | |
|
|
| ||
ECS230 | 39 Amps | 34 Amps | ||
60Hz, 40A | ||||
PCS230 | (8.1kW) | (8.1kW) | ||
| ||||
MCS230 |
|
|
| |
ECD230 |
|
|
| |
|
|
|
| |
PCD230 |
|
|
| |
|
|
|
| |
MCD230 |
|
|
| |
| Electrical Requirements |
| ||
Removing the Oven Doors
WARNING
1.Do not attempt to disengage the hinge catches with the door removed from the oven. The hinge springs could release, causing personal injury.
2.Do not lift or carry oven door by the door handle
Due to the weight of this appliance, removing the door(s) will significantly reduce the lifting load, while also providing the installer with a place to grip the oven when lifting it into place. Open the door to its fully opened position. Rotate the catch over the retaining arm on each hinge. Lift the oven door to about a 30˚ angle from the horizontal. Pull the door away from the oven while continuing to lift.
NOTE:
The four (4) leads supplied with this appliance are UL recognized for connection to larger gauge household wiring. The insulation of these leads is rated at temperatures much higher than the temperature rating of household wiring. The current- carrying capacity of the conductor is governed by the temperature rating of the insulation around the wire, rather than the wire gauge alone.
Hinge Catch
L
® 
L
® 
TIMER1
To remove door, rotate catch up.
Door Removal
30°
Lift door up to 30° angle, then
pull the door away from the oven.
6
