Installation Instructions
Verify the Package Contents
•Remove all styrofoam and plastic wrap from the dishwasher. Be sure to remove the toe kick from the top of the dishwasher packaging. With the assistance of at least one person, remove the dishwasher from the shipping pallet. Place the unit to the side of the cabinet opening. NOTE: Since each dishwasher is tested at the factory for proper operation, there may be some residual water inside the unit, the water supply line or drain hose.
•Remove the “O” ring attached to the water line in a plastic bag. Set it aside for use during the Water Line Connection.
•Remove all of the packing materials from inside and outside of the unit. DO NOT allow any of the shipping materials, loose screws or plastic to remain inside.
•Verify that all required components have been provided. Inspect the unit for shipping damage (including cosmetic damage). If any item is missing or damaged, please contact your dealer immediately. Do not install a damaged or incomplete appliance.
Included
AToe kick
BMounting hardware (2 screws, 2 spacers)
CPlastic feet (3)
DO ring (comes attached to the water line)
EProduct literature (includes door panel template on model RDW24I)
FDoor panel mounting screws,
(2) 3/8” and (6) 1 3/4” (model RDW24I only)
Tools required for installation
GLevel
HCrescent wrench
JWire strippers (permanent electrical connections only)
KFlat blade screwdriver
LPhillips screwdriver (#2) M Tape measure
NElectric drill with 1 1/2” and 2” drill bits
A
B CD EFG
H JK
L
M
Materials required for installation (not provided)
PHose clamp (select the correct size clamp for the drain connection...see facing page)
Make sure you have everything necessary for proper installation before proceeding. Additional hose and clamps may be required for installation of an air gap according to local code.
N | P |
8