Installation Instructions
Installing the Toe Kick
1.Loosen the brackets for the toe kick by moving the gray catches toward the center of the dishwasher.
Catch
Toe kick bracket
2.Adjust the brackets (pull out or push in) until they are flush with the kitchen toe kick on both sides as shown below.
3.Lock the brackets in place by pushing both catches into the appropriate notch in the holder.
4.Hang the toe kick on the brackets as shown. Check to make sure that the toe kick is even with the kitchen cabinet toe kick. If necessary, remove the toe kick and readjust the brackets.
Installation Checklist
WARNING•To ensure a safe and proper installation, the following checklist should be completed by the installer to ensure that no part of the installation has been overlooked and the unit is working properly.
•Proper installation is the responsibility of the homeowner. The importance of proper installation of your Dacor dishwasher cannot be overemphasized.
□□Has the unit been inspected for cosmetic damage?
□□Has all packaging and literature been removed from the dishwasher?
□□Is the power cable connected to a three prong grounded electrical outlet or grounded junction box that meets the electrical specifications?
□□Has the “O” ring been installed on the water supply line?
□□Have the water supply line and the drain hose been properly installed according to specifications?
□□Has the unit been properly leveled?
□□Has the unit been attached to the surrounding cabinets using the
□□Has proper operation been verified?
□□Have the water supply line and the drain hose been checked for leaks?
□□Has the warranty been activated on line or the warranty card filled out and mailed?
16 
