Dacor RR30NFS[-C], RR30NIFS[-C], RR30NIS[-C] Racks, Warning, Standard Racks, GlideRack™ Oven Racks, Standard Rack, To insert a standard oven rack:, To remove a standard oven rack:

Operating the Oven

Racks

You may use either rack type on any level inside the oven.

Warning

To reduce the chance of burns, position the oven racks when the oven is cool. If you must reposition a rack when the oven is hot, do not allow potholders to contact the heating element inside the oven.

Standard RacksTo insert a standard oven rack:

1.Insert the end of the rack with the safety notches into the oven first.

2.Attach both sides of the rack to the rack supports in the oven as shown in the diagram below.

3.Begin to slide the rack in, and then, lift up so that the safety notches clear the ends of the rack supports.

4.Push the rack all the way in with both hands.

To remove a standard oven rack:

•If you want to remove an oven rack, grasp it with both hands and pull gently straight out toward you until it stops.

•To remove the rack completely, lift the front of the rack up about six inches and continue to pull it out. Lifting the rack releases the safety notches. The safety notches reduce the chances of a rack coming out of the oven accidentally.

Back of rack

GlideRack™ Oven Racks

Your oven comes with Dacor’s deluxe GlideRack oven racks. You can pull them out further than other types of oven racks and still support heavy pots and pans full of food. They are great for heavier foods and the optional Dacor baking stone.

To install a GlideRack oven rack:

1.Align both sets of safety clips (right and left) on the back of the rack guides with the oven rack supports as shown below. NOTE: The diagram below shows instal- lation with the rack guides extended but, the rack may be installed with or without the guides extended, whichever is easier.

2.Begin to slide the rack in, lifting the front safety clips over the front of the oven rack supports.

3.Push the rack all the way in.

4.Grasp the rack in the center of the front and pull. The rack should come forward while the guides remain in place.

To remove a GlideRack oven rack:

•Grasp the rack with both hands and pull it gently straight out toward you until it stops.

•Lift up until the front safety clips just clear the front of the rack supports on the oven. Continue to pull out. Moving the end of the rack back and forth slightly, left to right, as you pull, will make it easier to remove.

Rack guides

Lift front safety clips over rack supports

Front of rack

Safety notch

Rack

support

Slide oven rack supports into slots on the rack

Front of rack

Slide oven rack supports between back safety clips

Rack support

Back of guide