Care and Cleaning
Convection Filter | Meat Probe |
warning
For your safety and proper oven performance,
The convection filter is located in the back of the oven chamber. Clean the filter regularly. If you allow it to become clogged, the oven’s convection cooking modes will not work properly. You also need to remove the filter during the self clean cycle.
Removing your oven’s convection filter:
When the oven is cool, put your fingers around the edges of the filter and gently push up.
1
Filter
To clean the filter:
Soak it in hot, soapy water. Rinse well. You may also place it in a dishwasher on the top rack. Dry the filter before
Installing your oven’s convection filter:
Carefully hook the metal clips on the back of the filter over the metal bar across the fan hole. Make sure it is centered over the hole. Be careful not to scratch the porcelain surfaces with the back of the filter.
warning
To prevent damage, do not immerse the meat probe in water.
The meat probe is constructed of silicone handles, a wire, a plug and a stainless steel skewer. To clean the skewer, use a scouring pad and hot, soapy water. When you clean the handles, wipe them with a soft sponge soaked with a solution of detergent and warm water.
Optional Broil Pan
The broil pan has a porcelain enamel finish. When you clean it, use a solution of detergent and hot water. If the broil pan is heavily soiled, use a scouring pad with plenty of water. Rinse it well after cleaning.
Optional Roast/Broil Pan with “V” Shaped Rack
The roast/broil pan has a porcelain enamel finish. When you clean it, use a solution of detergent and hot water. If the roast/broil pan is heavily soiled, use a scouring pad and plenty of water.
Rinse it well after cleaning.
The optional “V” Shaped rack and the grill are finished with an Excalibur™ nonstick coating. When you clean them, use a mild solution of detergent and warm water. Use the soft side of a sponge to scrub them and dry them with a
Metal bar
Clips on back of |
|
filter | continued... |
23