Dacor RR30NFS, RR30NIFS, RR30NIS Model, 31/2”, 3 inch, RR30NS, 2 1/2”, Back of, RR30NFS, RR30NIS, overhang, ATKR30SR, trim kit, overhang, ATKR30SR, trim kit, RR30NS-C, RR30NIFS, (6.4 cm)

RR30NS, RR30NFS, RR30NIS, RR30NIFS

Document # PG05-009		Revised 05/23/13 Page 2/5
	Renaissance 30” Wide	PLANNING
	Electric Inductive Range	GUIDE
Product Dimensions (cont.)

				27 9/16” (70.0 cm)
	3/8” min. (1.0 cm)
	flat countertop				Range trim resting
	overhang				on countertop
		ATKR30SR
					Countertop	Cabinet face
		trim kit
		installed
						Back of
						side panel
						rests against
			3/8” min. (1.0 cm) space			cabinet face
						3 inch
			required behind ERV30[15]
			chassis to clear stiffener			side panel
ERV30[15]
raised vent				RR30NI[F]S range

side View - Downdraft ERV30[15] with Slide-In, Self- Rimming Installation with 3” Side Panels Installed

Electrical SpecificationsELECTRICAL REQUIREMENTS

Electrical Circuit	Total Connected
Required	Load**
240 Vac 60 Hz, 4 wire*,	11.5 kW (48.0 Amp.)
50 Amp.

*Two 120 Vac hot (L1 and L2), one neutral (N1) and one ground.

**This information above is for reference only. If the above data does not agree with the product data label, use the data on the product data label.

IMPORTANT: Models with -C option suffix are ranges that come with a factory installed 4-wire appliance cord with NEMA 14-50P plug. For freestanding ranges installed in Canada, a factory installed 4-wire appliance cord with NEMA 14-50P plug is required, without modification. For slide-in ranges installed in Canada and all ranges installed outside of Canada, the 4-wire appliance cord configuration (-C type) is optional and may be utilized where local codes permit The plug is designed to plug directly into a NEMA 14-50R electrical receptacle installed by a licensed electrician according to the above specifications.

NEMA 14-50P Plug NEMA 14-50R Receptacle

		27 9/16” (70.0 cm)
3/8” min. (1.0 cm)
flat countertop			Range trim resting
overhang			on countertop
	ATKR30SR
			Countertop
	trim kit			Cabinet face
	installed

	3/8” min. (1.0 cm) space
	required behind ERV30[15]
	chassis to clear stiffener
ERV30[15]
raised vent	RR30NI[F]S range

side View - Downdraft ERV30[15] with Slide-In, Self- Rimming Installation with 3” Side Panels Removed

Factory Wiring

	Model		Factory Electrical Connection
RR30NS,		Power cord not installed. Not for installation in Canada.
RR30NFS
RR30NS-C,		Cord connected, for installation in Canada (and U.S.A.,
RR30NFS-C			where local codes permit).
RR30NIS,		No power cord. May be installed in Canada and U.S.A.
RR30NIFS
RR30NIS-C,		Cord connected, may be installed in Canada and U.S.A.,
RR30NIFS-C			where local codes permit.

10”(25.4 cm) 10”(25.4 cm)

12” (30.5 cm)

2 1/2”
(6.4 cm)	1” (2.5 cm)

31/2”(8.9 cm)utility clearance behind range

All specifications subject to change without notice. www.dacor.com Phone: (800) 793-0093