RR30NS, RR30NFS, RR30NIS, RR30NIFS
Document # | Revised 05/23/13 Page 1/5 | |
| Renaissance® 30” Wide | PLANNING |
| Electric Inductive Range | GUIDE |
| Model | Configuration | Handle Type | |
Freestanding, | Mounted on | ||
(full size side panels) | outside of door | ||
| |||
Freestanding, | Flush handle, | ||
(full size side panels) | integrated in door | ||
| |||
Mounted on | |||
(3 1/4” removable side panels) | outside of door | ||
| |||
Mounted on | |||
(3 1/4” removable side panels) | outside of door | ||
|
* Order
All tolerances ±1/16” (±1.6 mm) unless otherwise noted.
warning
•Observe all governing codes and ordinances during planning and installation. Contact your local building department for further information.
•This appliance must be installed in accordance with the accompanying installation instructions.
Available Backguards| Part Number | Description | Compatibility | |
ADRB30E03 | 3 Inch | Optional on all models | |
ADRB30E06 | 6 Inch | Standard on models RR30NS, RR30NFS | |
Optional on models RR30NIS, RR30NIFS | |||
|
| ||
ADRB30E09 | 9 Inch | Optional on all models | |
|
|
|
Models RR30NIS and RR30NIFS come equipped from the factory with flat stainless trim piece in place of a backguard. A backguard may be purchased as an optional accessory. Add an additional 1/16 inch to depth dimensions below when installing a backguard on models RR30NIS and RR30NIFS.
Front of open door
B 
Front of handle
C
Front panel
D
Rear of front panel1” (2.5 cm) 
Backguard thickness9” (22.9 cm)�backguard*6” (15.2 cm) 3” (7.6 cm) backguard* backguard*External handle 
shown, some models have integral handle
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
| RR30NI[F]S: |
|
|
| ||||
|
|
|
| 3/8” (9.5 mm) |
|
|
| ||||
|
|
|
| thick top trim |
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
| RR30N[F]S: | 35” | |||||||
|
|
| full stainless |
|
| (88.9 cm) | |||||
|
|
| steel side panels | to | |||||||
|
|
|
|
|
|
|
|
| 37” | ||
|
|
|
|
|
|
|
|
| |||
|
| RR30NI[F]S: | (94.0 cm) | ||||||||
|
|
|
|
| |||||||
|
| 3” (7.6 cm) |
|
|
| ||||||
partial stainless |
|
|
| ||||||||
steel side panels |
|
|
| ||||||||
|
| (removable) |
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dimension | RR30NS, RR30NFS | RR30NIS, RR30NIFS |
A | 46 1/4” (117.5 cm) | 46 1/16” (117.0 cm) |
C | 25 1/2” (64.8 cm) | 25 5/16” (64.3 cm) |
|
|
|
D | 23 3/8” (59.4 cm) | 23 3/16” (58.9 cm) |
|
|
|
Dimension | RR30NS | RR30NIS |
B | 27 7/8” (70.8 cm) | 27 11/16” (70.3 cm) |
|
|
|
The trim on models RR30NS and RR30NFS are not compatible with a raised vent.
Models RR30NIS and RR30NIFS are compatible with Dacor raised vent models ERV30 and ERV3015. Use only these specified raised vent models.
All specifications subject to change without notice. | www.dacor.com | Phone: (800) |