- 20 -

4.After a few seconds, it will switch to:

5.If the vehicle Diagnostic Protocol is OBD-IIBut the DTC Code is MANUFACTORYPlease press UP or DN buttonthen press yes , the screen will change to:

Or else, Press NO,forget this step and Select MF

6Turn the ignition on.

DO NOT start the engine.

7Press the button once, the Scan tool will automatically start to communicate the ECU of vehicle and search which type of communication protocol is using. Once the Scan tool identifies the computer’s communications protocol, a communication link is established.

The protocol type will be shown on the LCD display.

Page 20
Image 20
Daewoo AD100 user manual