Daewoo DJ - 4720, DJ - 5520, DJ - 4710, DJ - 5510, DJ - 4710E, DJ - 5510E, DJ - 4720E, DJ - 5520E

Troubleshooting

Symptoms and Solutions

Please check the following list prior to calling Daewoo Electronics Service Centre for assistance

Is the TV power cord plugged into the outlet correctly?

Please check the power cord and connect it properly to the outlet.

Press the main power button at the front controller panel.

Is the antenna towards the right direction?

Has the Channel Fine Tuning been adjusted incorrectly?

Turn the antenna towards where the broadcasting station is

Press the Fine Tuning button and adjust the screen image

This may happen when there is a bad reception due to interference or depending on the location of the broadcasting station.

Press the " " button and select "Forced Mono"

-46-

Has the "mute" button at the remote controller been pressed accidentally?

Have you checked its volume?

Press the "mute" button on the remote controller once more. Adjust the volume by pressing the "right" button

Have you checked the antenna?

Have you checked whether it is receiving interference by vehicles or neon signs? Connect the antenna or change the antenna cable.

Has the remote controller receiving window been blocked or interfered by any object?

Are the batteries on the remote controller low?

Has the remote controller mode been set up in cable mode?

Please clear away any object that may block the TV from receiving the remote controller signals.

Press the " " button to change its current mode.

Have you checked the Colour?

Isn't the program itself broadcasting in black and white?

Have you checked the antenna connection?

Adjust the colour pressing the “Vol/” buttons as explained in page 30

Check other broadcasting programs

Check the antenna

Have you checked whether it is receiving interference from any other receiving waves-such as radio?

Avoid any item that may interfere with its proper operation