Setting Up TV
Stations
Manual tuning
1.Press the Number buttons(0~9) or the“
”button to select a program number you want.
2.Locate the selection bar on the Manual tuning at the Install menu.
•Press the“MENU”button to select the Install menu.
•Move the selection bar to the Install menu with“
”buttons.
•Place the selection bar on Manual Tuning and press the “
” button.
Picture
Screen
Sound
Function
Install
Position
Auto Tuning
Manual Tuning
Setup
Edit
Access |
| Exit |
3.Press the“
”buttons.
•A tuning screen will appear and cursor will move from left to right / from right to left.If you want to stop tuning press the“MENU”but- ton.
•After searching a station, you must press the“OK”button to store the Program.
Manual Tuning
Pr 01 PAL / SECAM
PR Change | Access | Store | Exit |
Note :
•If you are unable to get any programs using Auto Tuning because of a poor broadcasting signal,it is possible to store the Manual tuning.
•When you enter Manual Tuning after Auto Tuning in France or Swiss, if present channel is SECAM L/L’,TV set can only search SECAM L/L’.
•If you enter by other than by SECAM L/L’signal,TV set can search every by SECAM L/L’signal except SECAM L/L’.
•You can change the Programme number in the Edit mode.
•Manual tuning does not support this function.
30
