Daewoo DTQ-29U4SCV, DTQ-29U5SSFV, CN-401FN Alignment Instruction, WHITE BALANCE ADJUSTMENTS8

ALIGNMENT INSTRUCTION

4)WHITE BALANCE ADJUSTMENT(S8)

-Receive a good local channel.

-Enter the service mode and select service adjustment S8.

-You can see the OSD as shown in below.

R-GAIN	32	SRC R-BIAS	32
G-GAIN	32	SRC G-BIAS	32
B-GAIN	40	CVI R-BIAS	-8
R-BIAS	32	CVI G-BIAS	10
G-BIAS	32
	VWSELECT	C BADJUST L EXIT

-Using volume up or volume down, adjust service adjustment data of R-GAIN/G-GAIN/B-GAIN and R-BIAS/G-BIAS until a good gray scale with normal whites is obtained.ALIGNMENT INSTRUCTIONS

5)DIGITAL PRESET(D.P) ADJUSTMENTS(S9)

SUBBRIGHTNESS ADJUSTMENT

-Receive a good local channel.

-Enter the service mode and select service adjustment S9.

-You can see the OSD as shown in below.

DP-Brightness 10

DP-Contrast 10

DP-Color5

DP-Sharpness 18

VWSELECT C BADJUST L EXIT

-Select DP-Brightness item, adjust DP-Brightness data value to obtain normal brightness level.

DP-Contrast

- Fixed value = 10

DP-Color

- Fixed value = 5

DP-Sharpness

-Fixed value = 18

6)FACTORY OUTGOING MODE (S12 : FACT)

-If you select the S12, then the set becomes factory outgoing status.

-You can see the OSD ¡ SHIPPING OFF¡–

-11-