Daewoo DTQ 19V1FC, DTQ 13V1FC, DTQ 13V5FC instruction manual Changing the TVs Input

Changing the TV's Input

Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve connected another component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from the component.

To do this, you will need to switch from the ‘TV’ input to the ‘ Line ‘ Input, as follows.

1 With the TV on, press the MENU button twice, then “ Set-Up “ menu will appear.

2 Use the VCHW buttons to select “ Input “.

3 Press the CVOLB buttons to change from ‘TV’ to ‘ Line ‘.

4 Wait 10 seconds, or press the MENU button to return to normal TV viewing.

1
Set-Up
Language :		English
Reception :		Air
Memorize Channels
Add/Delete Channels
Input :		TV
Select	Adjust	Next

2
Set-Up
Language :		English
Reception :		Air
Memorize Channels
Add/Delete Channels
Input :		TV
Select	Adjust	Next

3
Set-Up
Language :		English
Input :		Line
Select	Adjust	Next

When it connected an Video/Audio cable from the Video/Audio out jack on the VCR to the Video/Audio in jack on the front your TV, and your TV’s back panel at the same time, the former takes precedence of the latter.

14Chapter 3 : Operating Your TV