Daewoo DTQ 20V4SCN, DTQ 14V4SCN, DTQ 14V1FCN, DTQ 20V1FCN Connecting an Antenna or Cable to Your TV

You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals.

you must obtain a combiner (available at your local electronics store). Press or screw the coaxial lead onto the combiner; place the twin leads underneath the screws on the combiner and tighten the screws. Press the cable from combiner onto the antenna terminal on the back of your TV.

you must obtain a combiner (avail-

able at your local electronics store). Place one set of twin leads underneath the screws on the combiner and tighten the screws. Do the same with the other set of twin leads. Press the cable from the combiner onto antenna terminal on the back of your TV.

If your cable set-up is not described below, please contact your cable company for more information.

simply press or screw the incoming cable onto the antenna terminal on the back your TV.

Connecting an Antenna or Cable to Your TV 9