Daewoo DTQ 20U4SC, DTQ 27U4SC instruction manual Changing Channels, Changing the Volume

Changing Channels

1	You can change channels in three ways:
	1 The WCHV buttons will take you through all memorized channels,
2	one by one. The WCHV buttons will not access channels that have
	not been programmed into the TV's memory. For more information
3	about programming channels into memory, see the section
	“Programming your TV's Channel Memory” on the previous page.

2 The number buttons (0-9) will take you to any channel, even if it has not been memorized. To change to a channel, enter its number; the TV will tune to the new channel when you enter the second digit of the channel.

3The PREVIOUS button will take you instantly to the last channel you were watching.

Changing the Volume

1	1	To change the volume of the TV set, use the CVOLB buttons on
2		the remote controller or on the front panel.
	2	To quickly turn off the sound, press the MUTE button on the remote.
		The ‘MUTE’ will appear on screen, colored green. To return the vol-
		ume to its previous level, press MUTE again.

10 Chapter 3: Operating Your TV