Daewoo DTQ 20U4SC, DTQ 27U4SC instruction manual Changing the TVs Input

Changing the TV's Input

Normally, your TV displays the signal coming through the antenna terminal. However, if you’ve connected another component to your TV(such as a VCR & DVD) using the Video/Audio input, you will want to be able to view the signal from the component.

To do this, you will need to switch from the ‘ TV ’ input to the ‘AV1-AV3, CVI’ Input, as follows.

1With the TV on, press the MENU button twice, then “ Set-Up ” menu will appear.

2Use the WCHV buttons to select “ Input ”.

3Press the CVOLB buttons to change the input source from ‘ TV ’ to ‘AV1, AV2, AV3, CVI’.

4Wait 20 seconds, or press DISPLAY button or MENU button to return to normal TV viewing.

*CVI means the Component Video Input (Y/ PB/ PR) from the DVD player etc.

*Users can also select these input modes with the TV/AV button or the INPUT button on the remote controller.

*On the AV1 mode , if you connect the S-VHS jack to your TV, "AV1" is changed to "S-VIDEO".

2 3-1

Set-Up Set-Up

Language :	English	Language :	English
Reception :	Air	Input :	AV1
Memorize Channels
Add/Delete Channels
Input :	TV

Select Adjust Next

Select Adjust Next

3-2

Set-Up

Language : English

Input :AV2

3-3

Set-Up

Language : English

Input :AV3

3-4

Set-Up

Language : English

Input :CVI

Select Adjust Next

Select Adjust Next

Select Adjust Next

12 Chapter 3: Operating Your TV