DAILY USE
SWITCHING ON TV SET
1)If
You can switch on using the remote control POWER button (A1), the NUMBER 0….9 buttons (A6), or PROGRAM UP (A10) / DOWN (A10) buttons.
The front panel PROGRAM UP/DOWN buttons (B4 or B5) can also be used.
Once on, the
2)If
You must press the TV set front panel MAIN POWER button (B1).
If a picture does not appear, then the
In this case, use the remote control as indicated in 1).
3)If
Once on, the
ON/OFF
The first time the TV set is powered ON, INSTALL menu will pop on screen. If you don’t want to install channels later press the key “MENU” twice to close all menus. Otherwise from this menu you can start an automatic channel installation. See on page 10 how to start automatic installation.
SWITCHING OFF TV SET
1)Pressing the remote control POWER button (A1), you can switch off to
2)Pressing the TV set front panel MAIN POWER button (B1), you can completely power off the TV set.
In this case, you must use the same front panel POWER button (B1) to switch on again (see above: SWITCHING ON TV SET).
Remark: If an analogue broadcast signal is not present after 30 minutes, the TV set will automatically return to
DIGITAL or ANALOGUE CHANNELS ?
This TV set can tune digital and analogue channels.
Use D/A button (A14) on the remote control to switch the TV between analogue and digital mode. Then use ▲PR▼ or 0..9 buttons to select channel.
7
