Daewoo DUB-2850GB, DUB-2842GB Channel skipping, Manual Channel Tuning, TV system modification

Channel skipping

-You can select skip „YES” or „NO” using the remote control RED „Skip” button (A20).

A program with skip „YES” doesn’t appear on screen when changing channels with the PROGRAM UP (A10) / DOWN (A10) buttons.

Manual Channel Tuning

Choose a starting point

-Select with „Program” the program from which you want to start manual tuning. Then the channel number, the frequency, the name and the program number of this program are displayed in the Install menu.

TV system modification

If necessary, you can modify the TV system :

-Select „system” function.

-Adjust choosing between FRANCE (L/L’), GB (I), EURO (B/G), E/ EURO (D/K) systems.

Then, the program displayed on the screen is changed to the chosen system.

Channel deleting

-Select the program to delete using the remote control CURSOR UP (A11) / DOWN (A11) buttons.

-Press the remote control YELLOW „Delete” button (A20). The deleted program is moved to program number 99 with skip changed to „YES”. The existing 99 program is moved to program number 98 and so on.

Channel searching

-Select the „Frequency” function.

-Press, and hold for more than 1 second, the remote control CURSOR RIGHT (A12) [LEFT (A12)] buttons to start up [down] manual tuning.

-Searching will stop automatically at the next channel found (to stop tuning, press the remote control MENU button (A9)).

Note: You can directly locate a program by entering the data into the „channel” or the „frequency” function.

Perform fine tuning

-If you are unable to get a good picture or reasonable quality sound due to poor reception, it is possible to perform fine tuning.

-Select the „frequency” function.

-Press, for less than 1 second, the remote control CURSOR RIGHT(A12) [LEFT(A12)] buttons to perform up [down] fine tuning in steps of 0.05MHz (50 kHz).

Channel order changing

-Select the program to move using the remote control CURSOR UP (A11) / DOWN (A11) buttons.

-Press the remote control GREEN „Move” button (A12): the program line background is highlighted in green, and can be moved to another position using the remote control CURSOR UP (A11)/ DOWN (A11) buttons.

-When the desired position is reached, confirm the new position pressing the remote control GREEN „Confirm” button (A12). Then the program line background will return again to grey.

Enter station name

It is possible to enter your own choice of name for each program. You can change an existing name, or enter a name where none exists. If none exists „- - - - - - -” will be shown in the Install menu, and program status display ( see the section PROGRAM STATUS DISPLAY on page 8).

-Select the „NAME” function.

-Select one of the 7 character positions by using the remote control CURSOR RIGHT (A12) / LEFT (A12) buttons to move the cursor.

-Then use the CURSOR UP (A11) /DOWN (A11) buttons to select the desired character for that position.

-Repeat the last two instructions for other positions, as desired.

-Once the name has been entered, press the OK button (A7) to store it. The name will be memorised to the program number currently shown on the „Store To” line. The „Store To” program number will highlight in red briefly.

Store program in memory

-Select the „store to” function

-Enter the program number you want to store by using the remote control CURSOR RIGHT (A12) / LEFT (A12) buttons, or directly by using the remote control NUMBER 0...9 buttons (A6).

-Press the OK button (A7) to confirm.

Remarks: this function can also be used if you want to copy a program already memorised to another program number.

12