Denon DN-H800 operating instructions NAMES OF PARTS AND THEIR FUNCTIONS Refer to page, English

ENGLISH

NAMES OF PARTS AND THEIR FUNCTIONS (Refer to page 4.)

FRONT PANEL

q POWER switch	• The mode changes as follows each time the button is
• Press this button to switch on the power.	pressed:
	Tuning frequency
w Loading drawer
	Input character
• Discs can be loaded and unloaded when this drawer is	Programme service name (PS)
open.	Programme type (PTY)
Do not force the drawer closed by hand.	Clock Time (CT)
e Preset channel button (1 to 5)	• The following may be displayed if the signals are weak or
• Use these when presetting and recalling stations. Also	no RDS service is available. This is not a malfunction.
	“NO PS”
use these with the SHIFT/PTY button to use a total of 30
	“NO PTY”
preset channels, A (1 to 5), B (1 to 5), … F (1 to 5).
	“NO CT”
r SHIFT/PTY button
	NOTE:
• Use this button to select the memory blocks, A (1 to 5), B	The programme type, programme service name and
(1 to 5), C (1 to 5), D (1 to 5), E (1 to 5), or F (1 to 5).	clock time are not displayed in the MW (AM) band.
• For PTY search use this button to select the program	“NO CT” may be displayed within the first minute after a
type. When writing station names, use this button to set
	station is tuned in, but this is not a malfunction. If time
the writing position.
	data is being broadcast, the time can be displayed after
t BAND button	one minute has passed.
• Selects FM or MW (AM).	!0Search/Character mode button
y Tuning mode button (AUTO/MANU)	(SEARCH/CHA)
• This switches between auto and manual tuning.	• This button is used for the RDS search (Refer to page 20,
Auto tuning: (The “AUTO” indicator lights.)	21), PTY search (Refer to page 21) and TP search (Refer
When TUNING UP and DOWN buttons is pressed in this	to page 21) operations, and to input the station name
mode, auto tuning starts and tuning stops automatically	(Refer to page 20).
when a broadcast station is found. Auto tuning is used to	!1TUNER ON/OFF button
receive FM broadcasts in stereo. Depending on the mode	• This button turns the tuner output on and off.
of the broadcast and the strength of the signal, auto
	• When off, the sound of the tuner is not output from any
tuning will automatically switch the receiving mode to	output. If any tuner-related button is pressed when the
stereo or monaural. During tuning, the frequency is	tuner is turned off, the tuner turns on and the indicator
automatically tuned up or down.	lights.
Manual tuning:	!2DISC SELECT button (1 to 5)
When TUNING UP and DOWN buttons is pressed in this
	• Press this button to select the disc number.
mode, manual tuning is performed until the control is
released. The broadcast is received in monaural	!3Number buttons
regardless of the mode of the FM broadcast. The	(1, 2, 3, 4, 5, 6, 7, 8, 9, 0/CLEAR and +10)
reception mode should be set to manual when there is	• Use these buttons for the direct search and program
noisy reception of stereo broadcasts (which are indicated	memory functions. For direct search, press for example
by the lighting of “AUTO”) and also when the signal is	button 3 if you want to hear track number 3. For track
weak. During tuning, the reception frequency is tuned up	number 12, press				then 2 . For track number 33,
				+10
or down only when the tuning buttons is operated.	press		three times, then press 3 . To program
		+10
u MEMORY button	tracks, press the PROGRAM/DIRECT button !7to set to
	the program mode.
• Frequencies and station names can be stored in the
memory. When this button is pressed, the “MEMO”	!4SKIP button
indicator on the display flashes for 10 seconds. Use the	• Each time this button is pressed, the carousel will rotate
SHIFT/PTY button and the preset channel buttons during	in a clockwise direction to the next tray position. This
this time to designate the desired preset channel.	allows for loading or unloading of discs.
i TUNING UP and DOWN buttons	This button is also used to select the next disc, in the
	normal play continuously.
• These buttons are used to select AM and FM stations.
	!5OPEN/CLOSE button (5)
o Display mode selector button (DISPLAY)
	• Press this button when opening.
• This button is used to select the display mode.
	• The drawer is opened toward the front.
	• Press the button again to close the drawer.

8