Daewoo DV6T811N owner manual To Delete Channels Manually, Selecting cable or antenna viewing

DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ˘ ` 34

ToDeleteChannelsManually

After memorizing automatically channels, when the same broadcasting is memorized in more than two channels, or you want to delete badly displayed channels, follow the procedures below.

1	Press [SETUP/ENTER] button and select “CHANNEL SET”.
	Select “Add/Remove Channels”.				CHANNEL SET
				Auto Channel Search
	Move	into “Add/Remove Channels” with		Add/Remove Channels
				Signal Type:					CABLE
	[ ] button and then, select the desired item
				Cable Box Setup
	with [	] button.		Output channel
				selection:					CH3
			Move:			Select:
			End:	RETURN
3				ADD/REMOVE CHANNELS
2	Select the desired channel and delete it.
	Press [NUMBER] button of remote control to				Channel
							02
	select the desired channel to delete. When				is now ADDED.
	[CLEAR] button is pressed, “ADDED” under the
	channel number converts into “REMOVED”.		Remove: CLEAR
			Select:			End:		RETURN
4	Check the deleted channel.
	To check the deleted channel, press [CH] button on remote control.

Selectingcableorantennaviewing

You must set the viewing mode for your VCR, choosing either CABLE (cable system connection) or ANTENNA (antenna connection). To set the viewing mode:

Press [>] to toggle the setting between CABLE and ANTENNA in CHANNEL SET screen.

When the desired viewing mode is displayed, press RETURN twice to exit.

CHANNEL SET

Auto Channel Search

Add/Remove Channels

Signal Type: CABLE Cable Box Setup

Output channel

selection: CH3

Move: Select:

End:RETURN

34