Daewoo DV6T811N owner manual Indexing Viss Signals, Searching Viss Signals, Press button until

DVD-Video(USA)_DV6T811N-LT 02.4.16 2:38 PM ˘ ` 43

Indexing VISS Signals

What’s VISS?

VISS is a quick and convenient search system for a recorded program by means of the program’s address indexed in the beginning of the recorded program. Provided that there are various recorded programs in a tape, VISS must be a typical function in searching for a preferred program.

VISS signal will be indexed automatically while starting any TIMER

RECORDINGS including programmed and/or preselected recording.

**The program for VISS function should be over 5-minutes length

**Note that if the tape to be recorded is fully rewinded, it must be rolled a little before recording, for which the device might not index in the first of it (transparent part).

Searching VISS Signals

■First, please press [VCR] button on your REMOTE for VCR mode, then manage it.

■Inject your VISS-indexed tape.

1	Please press [SETUP/ENTER] button.						SETUP
					CLOCK SET
	Press [ ] button until		is located in		TIMER RECORDINGS
	“FUNCTIONS”, then select “FUNCTIONS”				CHANNEL SET
					FUNCTIONS
	by pressing [ ] button.				LANGUAGE SELECT
				Move:				Select:
				End:	RETURN
2	In the menu, please select “VISS +” or					FUNCTIONS
					Auto Play:			ON
	“VISS-”.				Auto TV/VCR:			ON
	If your search is forward direction, select “VISS				Viss +
					Viss -
	+”. If reverse direction, select “VISS -”.				Counter 0 Stop
				Move:				Select:
				End:	RETURN
3	VISS searching motion
	• Searching, whether it forward or reverse, starts from the current position to the
		selected direction in serial order for VISS-indexed parts (first recorded parts) of
		which contents are played in 5 seconds.
	•	yourIf a purposed“PLAY” button.part is found from the 5 seconds playing, please playback it with

VCR Operation

43