OPERATING INSTRUCTIONS
NOTE
• FOR MOST ECONOMICAL USE
1.Properly control the room temperature.
2.Avoid the unit being exposed to direct sunlight. Keep direct sunlight from the room.
3.Do not leave doors and windows open.
•FAN & COOLING CONTROL
The Fan Control Selector Switch has five positions.
Choose one of the speed settings by rotating the fan control Selector Switch to the appropriate position.
CAUTION
When the air conditioner has been performing its cooling operation and is turned “OFF” or set to the ‘FAN” position, wait at least 3 minutes before resetting to the cooling operation.
| OFF |
LOW | LOW |
FAN | COOL |
HIGH | HIGH |
FAN | COOL |
OFF | Select this setting for stop all operation of air conditioner |
HIGH FAN Select this setting for maximum air circulation without cooling.
LOW FAN Select this setting for quiet air circulation without cooling.
HIGH COOL Select this setting for cooling operation with HIGH FAN.
LOW COOL Select this setting for cooling operation with LOW FAN.
SELECTOR
• TEMPERATURE CONTROL
Choose a temperature settings by rotating the knob of thermostat to the appropriate position
NOTE
Setting the control at the coldest extreme of the temperature range will not cool the room any faster. Usually the midpoint is a good starting position. If the room temperature is not satisfactory after a reasonable period of time, adjust the temperature control to a lower or higher setting.
•The Thermostat automatically starts and stops cooling operation in order to keep the room temperature at a proper level, and this results in efficient use of power and economical cooling.
•Turn clockwise for a cooler room temperature.
•Turn
THERMOSTAT | 10 |