Maintenance
Proper care of your washer can extend its life. This section explains how to care for your washer properly and safely.
Cleaning your washer
Exterior | Interior |
|
|
Wipe up detergent, bleach, and other spills with a | Clean interior with 250ml of chlorine bleach |
soft, damp cloth or sponge as they occur. | mixed with 500ml of detergent. |
Occasionally wipe the outside of the washer to | Run washer through a complete cycle. |
keep its looking like new one. | Repeat this process if necessary. |
|
|
Remove pins, clips, coins, bolts, nuts, etc from pockets. Failing which can cause damage to the drum assembly, pump, etc.
Winter storage or moving care
Install and store your washer where it will not freeze. Because some water may stay in the hoses, freezing can damage your washer.
If you store or move your washer during freezing weather, winterize it.
To winterize washer | To use washer again |
• Turn off water faucet. | • Flush water pipes and hoses. |
• Disconnect and drain water inlet hoses. | • Reconnect water inlet hoses. |
• Run washer on a drain and spin setting | • Turn on water faucet. |
(see page 10) for 1 minute. | • Reconnect power supply cord. |
• Unplug the power supply cord. |
|
|
|
Non-use or vacation care
Operate your washer only when you are at home.
If you are on vacation or don’t use your washer for an extended period of time, you should:
•Unplug the power supply cord or turn off eletrical power to the washer.
•Turn off the water supplier to the washer.
This helps avoid accidental flooding (due to a water pressure surge) while you are away.
