AUTOMATIC DRAINNING TIME ADJUSTMENT
This system adjusts the draining time automatically according to the draining condition.
Draining condition
Good draining | The washer begins spin process after drainage. |
|
|
Bad draining | Draininig time is prolonged. |
|
|
No draining | Program is stopped and gives the alarm. |
|
|
FUNCTIONAL PRINCIPLE
1The micom can remember the time from the begining of drain to reset point when the pressure switch reaches to “OFF” point
Drain Time | Movement of the Program |
Less than
Continue draining
10minutes More than
Program stops and gives the alarm with 
blinked on display lamp.
10 minutes
2In case of continuous draining, residual drain time is determined by micom. Draining time as a whole = D + 40
Residual drain time.
The time remembered by micom.
10EXPLANATION
