LINT FILTER
Much lint may be obtained according to the kind of clothes to be washed and some of the lint may also sticks to the clothes.
To minimize this possibility a lint filter is provided on the upper part of the tub to filter the wash water as it is discharged from the water channel. It is good to use the lint filter during washing.
HOW TO REPLACE LINT FILTER
Filter
Bleach
Inlet
Pulsator
1Pull the filter frame upward.
2Turn the lint filter inside out, and wash the lint off with water.
3 Return the filter as it was, and fix the filter frame to the slot.
RESIDUAL TIME DISPLAY
When the START/HOLD button is pressed, the residual time (min.) is displayed on the time indicator, and it will be counted down according to process.
When operation is finished, the TIME INDICATOR will light up 
.
DRAIN MOTOR
STRUCTURE
Pull
Loosen 
FUNCTIONAL PRINCIPLE
Pulley
Lever
Inductive ring
Magnet
Coil of motor Magnet of motor
1When the DRAIN MOTOR connected to the power source, the DRAIN MOTOR rotates with 900 r.p.m and revolves the pulley by gear assembly for reducing.
2When the pulley is rotated, the pulley winds the wire to open the drain valve.
3 Therefore, rotation of pulley changed to the linear moving of wire.
4 The wire pulls the brake lever of Gear Mechanism Ass’y within 5 seconds.
5 After the wire pulled, gear assembly is separated from motor and condition of pulling is held by operation of the
lever.
6 When the power is turned off, the drain valve is closed because the wire returns to original position.
EXPLANATION 13
