W O R T H
k n o w i n g
Please keep the video machine’s guarantee card and receipt safe for warranty purposes.
Precautions
Read carefully through this manual to familiarise yourself with this high- quality televideo.
Make sure the rating of your household electricity supply matches that shown on the back of the televideo.
Refer to this chapter and the “Initial installation” chapter (pages
Do not…
expose the televideo to high levels of humidity and heat, to avoid the risk of fire and electric shock.
open the televideo. Have a qualified technician carry out repairs.
connect the televideo to the power supply if you have just moved it from a cold to warm environment. This can result in condensation inside the recorder and cause serious damage to the machine and cassettes. Wait around two hours to allow it to reach room temperature.
Make sure…
the televideo is placed on a steady, flat surface.
you place the televideo where there is good ventilation all around.
you clean the televideo only with a soft,
you disconnect the power supply if the televideo appears to be working incorrectly, is making an unusual sound, has a strange smell, has smoke emitting from it or liquids have got inside it.
Have a qualified technician check the televideo.
you disconnect the power supply and aerial if you will not be using the televideo for a long period or during a thunderstorm.
| The power cable must be fitted with a fused plug approved by |
| ASTA or BSI to BS 1362 and provided with a 5A fuse. |
5A | The fuse cover must always be securely replaced. If the televideo is |
| not worikng, the fuse may need replacing (see also “Electrical |
| Connection” on page 4). (U.K. Only) |
For your own safety!
There are no components in this televideo you can service or repair yourself.
Do not open the case of the televideo. Only allow qualified personnel to repair or service your set.
This televideo is designed for continuous operation. Switching it off does not disconnect it from the mains
Recording any copyright protected material may infringe a copyright.
NOTE : If the receiver is moved or placed in a different direction, the main power switch must be switched off for at least 15 minutes in order to take out colour purity errors on the screen.