I n i t i a l
INSTALLATION
Manual Tuning
MANUAL TUNING
PR | 08 |
SKIP | NO |
SEARCH | UP |
STATION NAME | |
STORE TO | PR08 |
| SELECT |
| MOVE |
MENU | EXIT |
MANUAL TUNING
PR08UHF
CHANGE
MENUEXIT
FINE TUNING
PR08UHF
CHANGE
ENTER
You can also call up the PRESET menu at the
MAIN MENU.
Press the NUMBER Button 0…9 or PR 
/
button to select a programme number you want. The screen will change according to the selected programme number.
SEARCHING FOR A CHANNEL
Locate the cursor to SEARCH UP or DOWN with
/
button at the MANUAL TUNING SCREEN and then press the enter.
The tuning screen will appear and the cursor will move from left to right.
To stop searching, press the MENU button. Pressing and holding down the 
/ 
button during 3seconds, the band will change as following.
UHF 
After locating a station, press the menu button. Select station name and memorize programme number with UP/DOWN button or the NUMBER button 0…9.
use 
/
button to set the SKIP to ‘NO’
Press the “enter” key when the cursor is put on the “STORE TO”, it is possible to memorise the searched channel.
If you want to select “SKIP YES” PR. use the digit key.
FINE TUNING
If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the fine tuning.
Select the FINE TUNING at the PRESET MENU and FINE TUNING SCREEN will appear.
Press 
/
button to get a good picture and sound you want and to memorize press the
ENTER.
10
