Samsung SHR-8082, SHR-7082, SHR-7080 Preset setting, Camera setting, Accordingly, Zone SET

preset setting

A preset is a set of specifi c target points of a PTZ camera, and up to 20 presets per a camera can be stored.

Using the mouse may help easy setup.

1.In PTZ Control mode, use the direction buttons to adjust the camera in a desired direction.

. Select the <save/add> key.

The virtual keyboard for inputting the preset will appear.

` Refer to “Using Virtual Keyboard”. (Page 36)

~Save/Add : You can add and save the preset.

~Rename : You can change the settings of the existing presets.

~Delete : Deletes the selected preset.

~Delete All : Deletes all existing presets.

M	` If you replace the camera of the channel that stores the preset list with a new one, you should reset the preset
	accordingly.

. Press <oK>.

The preset will be saved as a name that you entered.

camera setting

A PTZ camera has its own menu system. Optimize the PTZ camera according to the DVR.

Using the mouse may help easy setup.

● using the dvr

1.Connect the PTZ camera to the DVR and run the PTZ camera again to display the camera’s protocol setting window.

. Check the protocol ID of the camera.

`In “Device > Setting the PTZ”, enter the PTZ camera ID in the ID input box of the channel that is connected to the PTZ camera. (Page 42)

SAMSUNG PROTOCOL

ADDR	0
TYPE	RS-485,HALF
BAUD	9600
LENS	OK!
TILT	OK!
PAN	OK!

. Select <cam. setup> in the PTZ Control menu. The camera-specifi c menu appears.

`You can configure the settings of only those cameras that support the protocols of Samsung and Panasonic.

`If you are setting Auto Pan or Pattern in the camera menu, press and hold the appropriate button for a certain time so that the button operation can be different from that in normal PTZ setting.

Camera Setup

OK Exit

** MAIN MENU **

CAMERA SET...

VIDEO SET...

PRESET...

ZONE SET...

AUTO SET...

ALARM SET...

OTHER SET...

CLOCK SET...

SYSTEM INFO...

English _

00769B_SHR-8162_ENG-NEW.indb 63

2008-12-04 오전 10:16:02