Samsung SHR-8160, SHR-7082 Motion detection, Setting the motion detection area, Motion Detection

using the DVR

~Alarm : Sets the alarm output method.

`For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 44)

~Duration : Sets the duration of alarm signal and alarm sound.

.When the sensor detection setup is done, press <oK>.

motion detection

Sensor Detection
Sensor	Sensor Operation 		Cam 			Alarm 		Duration 
1	OFF			1		None		OFF	
2	OFF			2		None		OFF	
3	Alarm Setup								
4	OFF			4		None		OFF	
5	OFF	1 		5	2	None	3	OFF	
6	OFF	4 		6	BEEP	None	All	OFF	
7	OFF		OK	7		None		OFF	
8	OFF			8	Cancel			OFF	
						None
							Previous/Next Page
			OK		Cancel

You can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the area.

Using the mouse may help easy setup.

.Use the up/down buttons (▲▼) in <event> window to move to <motion detection>, and press [enter] button. A window of motion detection area setup appears.

.Use direction buttons (▲▼_ +) to move to a desired item, and set the value.

~Mode : Sets whether to activate motion detection.

~Sensitivity : Sets the sensitivity level of the motion detection.

~Alarm : Sets the alarm output method.

`For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 44)

~Alarm Duration : Sets the duration of alarm signal and alarm sound.

.When the motion detection setup is done, press <oK>.

Motion Detection

CH	Mode 		Sensitivity 		Alarm 	Alarm Duration 
1	OFF		Very High		None	OFF	
2	OFF		Very High		None	OFF	
3	OFF		Very High		None	OFF	
4	OFF		Very High		None	OFF	
5	OFF		Very High		None	OFF	
6	OFF		Very High		None	OFF	
7	OFF		Very High		None	OFF	
8	OFF		Very High		None	OFF	
						Previous/Next Page
						Motion Region
			OK		Cancel

setting the motion detection area

Select <motion region>.

When “motion region” window appears, select a channel for detection and set the area of motion detection.

~To set the area in “motion region” window

In the “motion region” window, select desired region

from <>.

~To set the area using <individual> selection

In the “motion region” window, you can select cells individually by using <individual>.

Select

Unselect

Inverse

Menu

Motion Region

1 CH

Individual Select All

OK Cancel

When selected <individual>, “motion region” window disappears and you can select cells one by one.

When the motion area setup is done, press the <menu> on the screen or the [menu] button on the remote control or front panel to display the “motion region” window again.

-Select : Selected cell is set to be a part of motion detection area.

-Unselect : Selected cell is removed from the motion detection area.

-Inverse : Unselected cells are set to be the motion detection area.

-Menu : After selecting individual motion areas, move to the “motion region” window.

` If selected <Select All>, selected motion area is applied to all channels.

When the motion detection setup is done, press <oK>.

_ using the DVR

00769B_SHR-8162_ENG-NEW.indb 52

2008-12-04 오전 10:15:44