Samsung SHR-7082, SHR-7080, SHR-7160, SHR-8162, SHR-8160, SHR-7162 Setting the protocol, Protocol

using the DVR

~IP, Gateway, Subnet Mask, and DNS

-For <static ip> : You can directly input IP address, Gateway, Subnet Mask and DNS.

-For <dynamic ip> : IP address, Gateway, and Subnet Mask are set automatically.

-For <adsL> : IP address, Gateway, and Subnet Mask are set automatically.

~User ID, Password : In case you selected ADSL, provide the “user id” and its “password”.

Connection Mode
Connection	Protocol
 Connection Mode	ADSL
 Bandwidth	600kbps
 IP	192.168. 1.200
 Gateway	192.168. 1.	1
 Subnet Mask	255.255.255. 0
 DNS	Manual	168.126. 63.	1
 User ID	ID
 Password	********
	OK	Cancel

M ` DNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.

.When the connection setup is done, press <oK>.

setting the protocol

.Use the up/down buttons (▲▼) in <network> window to move to <connection mode>, and press [enter] button.

.Select <protocol>.

.Use direction buttons (▲▼_ +) to move to a desired item, and set the value.

~Protocol Type : Select the protocol type between TCP and UDP.

`If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated.

Connection Mode
Connection	Protocol
 Protocol Type	TCP
 Port(TCP)	554 ~ 557
 Port(UDP)	8000 ~ 8159
 Unicast/Multicast	Unicast
 Multicast IP	224.126.	63.	1
 TTL	5
 Webviewer Port	80
		OK	Cancel

~Port (TCP) : Initially, <554~557> is set. It increases / decreases by 4.

-TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments.

~Port (UDP) : Initially, <8000~8159> is set. It increases / decreases by 160.

-UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments.

~Unicast, Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated.

-Unicast : Transfers data (UDP, TCP) individually to each connecting client.

-Multicast : Multiple client can receive the data (only in UDP) without putting additional traffi c load to the network.

~Multicast IP : User can directly input.

~TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.

~Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.

.When the protocol setup is done, press <oK>.

_ using the DVR

00769B_SHR-8162_ENG-NEW.indb 56

2008-12-04 오전 10:15:50