60_ using the DVR
using the DVR
mailing service
You can send an e-mail to a DVR-registered user at a specifi c time interval, or if an event occurs.

smtp setting

Sets the SMTP mail server.
Using the mouse may help easy setup.
In the <network> setting window, press the up/down
(
▲▼
) button to move to <mailing service> and press the
[enter] button.
Select <smtp>.
You will see the SMTP setting window.
Use direction buttons (
▲▼_ +
) to move to a desired item
and set the value.
Server Type : Displays the connected server type.
Server : Enter a server to connect to.
Port : Sets the communication port.
Use Authentication : Check this if the SMTP server uses user authentication.
The account input box will be activated.
User : Enter a user to use authentication when connecting to the SMTP server.
Password : Enter the password of the SMTP server user.
Secure Transfer : Select one from <never/tLs> and <if available/tLs/ssL>.
Sender : Use the virtual keyboard to enter the sender’s e-mail address.
Refer to “Using Virtual Keyboard”. (Page 36)
Test : Conducts the test on the server settings.
When the SMTP setting is done, press <oK>.

event setting

You can set the interval and type of the event that will be sent to the user.
Using the mouse may help easy setup.
In the <network> setting window, press the up/down
(
▲▼
) button to move to <mailing service> and press the
[enter] button.
Select <event>.
Use direction buttons (
▲▼_ +
) to move to a desired item
and set the value.
Event Interval : Set the event interval.
If a series of events occurs, the e-mail will be sent at the specifi ed
interval, not on each event.
Use Event Transfer : Select an event type to send if an event occurs.
If the selected event occurs, the e-mail will be sent to the group that has the recipient authority.
When the event setting is done, press <oK>.
3.
4.
5.
~
~
~
~
~
~
~
~
`
~
6.
3.
4.
5.
~
`
~
6.
Mailing Service
SMTP
OK Cancel
Recipient
Event Interval 10 min
Use Event Transfer
Alarm Motion
Change P/W HDD Info Video Loss
Power On/Off Manual Record
Event Group
Mailing Service
SMTP Event
OK Cancel
Use Authentication
Group Recipient
ServerType SMTP mail Server
Server
Port 11
User
Password ********
Secure Transfer Never/TLS
Sender ex. user@example.net
TEST
00769B_SHR-8162_ENG-NEW.indb 60 2008-12-04 오전 10:15:54