Epson 821 manual Select a sub-menuitem, Change the setting, Close the menu

Using the Configuration Menu Functions

67

4 Select a sub-menu item.

Tilt the [ ] button on the remote control up and down or press the [] and [] buttons on the projector's control panel to move to the sub-item to be set, and then press the [Enter] button.

The items that are displayed in the "Image" menu, "Signal" menu and "Info" menu vary depending on the input source that is being projected.

5 Change the setting.

•Tilt the [	] button on the remote control or press the [ ],
[ ], [	] and [ ] buttons on the projector's control panel to

change the setting.

: Current setting value

: Currently-selected setting item

•If you press the [Enter] button when at items with a displayed, the setting screen for that item will be displayed. After making the setting, press the [Enter] button to accept the setting. The will change to green.

6 Close the menu.

Press the [Menu] button.

TIP

Refer to "List of Functions" for details on the functions of each menu item. sp.51