Epson 821 manual Take out the lamp, Install the lamp cover, Install the new lamp

Maintenance

87

4 Take out the lamp.	6 Install the lamp cover.
Hold the lamp as shown in the illustration below and lift it up	Slide the lamp cover and tighten the cover fixing screws.
and out of the projector.
If the lamp is broken replace it with a new lamp, or contact your
local dealer for further advice. If replacing the lamp yourself,
be careful to avoid pieces of broken glass.

5 Install the new lamp.

Insert the new lamp so that the lamp fits the place correctly and once it is fully inserted, tighten the two screws.

TIP

•Install the lamp securely. If the lamp cover is removed, the lamp turns off automatically as a safety precaution. Moreover, the lamp will not turn on if the lamp or the lamp cover is not installed correctly.

•The lamp contains mercury. Dispose of used lamps properly in accordance with your local regulations.