Epson 821 manual Using the Configuration Menu Functions, Projection

Using the Configuration Menu Functions

62

Sub-menu		Function	Default
Projection	Sets the projection position for the projector.		Front
	• Front	: Select when the projector is in front of the
		screen.
	• Front/Ceiling: Select when the projector is in front of the
		screen and suspended from the ceiling.
	• Rear	: Select when the projector is behind the
		screen.
	• Rear/Ceiling : Select when the projector is behind the
		screen and suspended from the ceiling.
Operation	This lets you make settings related to projector operation.		Direct Power
	Direct Power ON:
	When the projector's power cable is connected, projection		ON: OFF
	starts without needing to press the [Power] button.
	* When "Direct Power ON" is set to "ON", turn the power
	off by pressing the [Power] button, then wait for the cool-
	downg period to finish and then disconnect the power
	cable. If the power cable is left connected to the wall
	outlet when "Direct Power ON" is set to "ON", the
	projector will turn on if a power outage occurs and then
	the power is restored.		Sleep Mode:
	Sleep Mode:
	Sets the energy saving operation when no signal is being		OFF
	input.

•When set to "ON", projection stops automatically and then after the cool-downgperiod is finished, the projector changes to sleep mode if no operations are carried out for 30 minutes while the "No Signal." message is being displayed. (The Power indicator lights orange.)

•Projection starts again when the [Power] button is pressed.