Epson 821 manual Setting Password Protect, When User’s Logo Protect is enabled ON, seconds

Preventing theft (Password Protect)

28

When "User’s Logo Protect" is enabled (ON)

If an attempt is made to carry out any of the following user logo operations, a message is displayed and the setting cannot be changed. To change the setting, set "User’s Logo Protect" to "OFF" first. sp.29

•Capturing a user's logo

•When the " Extended" - "Display" - "Background Color" menu setting is changed from "Logo" to "Black" or "Blue", or changed from "Black" or "Blue" to "Logo".

•When the "Extended" - "Display" - "Startup Screen" menu setting ("ON" or "OFF") is changed.

TIP

•If Password Protect has already been enabled, the "Password" screen will be displayed.

If the password has been entered correctly, the "Password Protect" menu will be displayed.

s"When Password Protect is enabled" p.27

•If Password Protect is set to "ON", attach the accessory Password Protect sticker to your preferred position on the projector as a theft- prevention measure.

Setting Password Protect

Use the following procedure to set Password Protect.

PROCEDURE

1	Hold down the [Freeze] button for approximately 5
	seconds.

The "Password Protect" menu will be displayed.

This can also be displayed by pressing the [Menu] button while holding down the [ ] button continuously for about 5 seconds.

Remote control

2 Turn "Power ON Protect" on.

(1)Select "Power ON Protect", and then press the [Enter] button.

(2)Select "ON", and then press the [Enter] button.

(3)Press the [Esc] button.

In the following "Timer" setting, you can set the time that the projector can be used without needing to enter a password.

If setting the time, continue on to the next step. If not setting the time, continue on to step 5.

TIP

The portion of the length of time set that has already been used can be checked using the "Timer-elapsed" command.

3 Select "Timer" and then press the [Enter] button.