Epson 821 manual Turning the Projector Off, connected to the projector, Press the Power button

Turning the Projector Off

34

Follow the procedure below to turn off the power of the projector.

PROCEDURE

1	Turn off the power for the signal sources that are
	connected to the projector.

Check that the power for all connected components has been turned off.

2 Press the [Power] button.

Remote control Projector

The following confirmation message will appear.

If you do not want to turn the power off, press any button except the [Power], [Page down], [Page up] and [Num] button.

If you do not press any button, the message will disappear automatically after seven seconds. (The power will not turn off at this time.)

CAUTION

If the message "The projector is over heating. Make sure nothing is blocking the air vent, and clean or replace the air filter." appears on the screen, press the [Enter] button on either the projector's control panel or on the remote control to turn the power the air filters. sp.84

3 Press the [Power] button once more.

The lamp will switch off. The Power indicator will flash orange and cool-downgwill start.

The cool-down period lasts for about 20 seconds.

When the cool-down is complete, a "pip-pip" confirmation buzzer will sound, and the Power indicator will change to light orange.

Stops flashing and lights orange