Epson 821 Selecting the Projection Quality, Colour Mode Selection, Dynamic Presentation Theatre

Adjusting the Image Quality

43

Selecting the Projection Quality

(Colour Mode Selection)

The following six preset colour modes are available for use depending on the characteristics of the images that are being projected. You can easily obtain the optimum image quality simply by selecting the colour mode that corresponds to the projected images. The brightness of the images will vary depending on which colour mode is selected.

Mode	Application
Dynamic	Brightness is emphasised, so that images are fresher and have
	greater modulation than in Presentation mode.
Presentation	Brightness is emphasised to produce images that are ideal for
	presentations.
Theatre	Movie images are optimised using natural tints.
Living Room	Brightness is emphasised to produce images that are ideal for
	projecting TV images, etc. in bright rooms.
sRGBg	Images conform to the sRGB colour standard. If the connected
	source has a sRGB mode, set both the projector and the
	connected signal source to sRGB.
Blackboard	Images with natural tints can be obtained when projecting
	onto a blackboard (green).

The default setting for the colour mode is as follows.

When computer or RGB video images are being input: "Presentation"

When other images are being input: "Dynamic"

PROCEDURE

The colour mode changes as follows each time the [Color Mode] button is pressed.

Dynamic Presentation Theatre

Blackboard sRGB Living Room

Remote control

The current setting appears in the top-right corner of the screen each time the colour mode is changed.

TIP

The colour mode can also be set using the "Color Mode" command in the "Image" menu. sp.51, p.53