Epson 821 manual Enter the setting time as a number of up to 4 digits, Turn User’s Logo Protect on

Preventing theft (Password Protect)

29

4 Enter the setting time as a number of up to 4 digits.

While holding down the [Num] button, use the numeric keypad buttons to enter the setting time within the range of 0 to 9999 hours and then press the [Enter] button. If you make a mistake entering the time, press the [Esc] button and re-enter the time. A message will appear after this.

When you have finished using the "Password Protect" menu, the countdown for the elapsed time will start.

TIP

If the setting time is set to "0", projection will not be possible when the power cord is disconnected from the wall outlet and then reconnected, unless you first enter the password.

5 Turn "User’s Logo Protect" on.

(1)Selct "User’s Logo Protect", and then press the [Enter] button.

(2)Select "ON", and then press the [Enter] button.

(3)Press the [Esc] button.

6	To set a password, select "Password" and then press
	the [Enter] button.

The message "Change the password?" will be

7 displayed, so select "Yes" and then press the [Enter] button.

The default setting for the password is "0000", but you should change this to your own desired password.

If you select "No", the screen shown at step 1 will be displayed again.

8 Enter a 4-digit password.

While holding down the [Num] button, use the numeric keypad buttons to enter a 4-digit number. The number entered will be displayed as "* * * *".

Once four digits have been entered, the confirmation screen will be displayed.

9 Re-enter the password that you entered in step 8.

The message "The new password is stored." will be displayed. If you enter the password incorrectly, a message will be displayed prompting you to re-enter the password.

10	Once the setting is complete, press the [Menu]
	button.

TIP

•When the time period has elapsed and the password is entered, projection will start again, the "Timer-elapsed" setting will be reset to "0" and the countdown will start again.

•Make a note of the password so that you do not forget it and keep it in a safe place.

•If you lose the remote control, you will not be able to enter the password. Keep the remote control in a safe place at all times.