Epson 821 manual Projecting S-VideoImages, Projecting Component Video Images

Connecting to a Video Source

24

Projecting S-Video Images

Use a commercially-available S-Videogcable to make the connections.

To S-Video output port

Projecting Component Video Images

Use the optional component videog cable to make the connection. "Appendices: Optional Accessories" sp.93

Use to connect the projector to a commercially available component video cable (RCA × 3, male).

S-Video cable	To [S-Video] port
(commercially-available)

TIP

If more than one input source is connected to the projector at the same time, you can use button operations to select the signals to be

To component video output port

Component video cable

(optional)

To [Computer1/Component Video1] or [Computer2/Component Video2] port (blue)

projected. sp.33

TIP

•The input source is determined automatically based on the input signals.

Some video signals may be reproduced with different colours from the original images. If this happens, set the input source to "Component Video1" or "Component Video2". sp.57

•If more than one input source is connected to the projector at the same time, you can use button operations to select the signals to be projected. sp.33