Epson 821 manual Setting Menu, Off

Using the Configuration Menu Functions

59

"Setting" Menu	Sub-menu		Function		Default
	Keystone	Corrects vertical keystone distortion in images.			Median value
		•When keystone correction is carried out, the projected			(0)
		image will become smaller.
		•If the images become uneven in appearance after keystone
		correction is carried out, decrease the sharpness setting.
	Auto	Sets the function for automatically detecting the projector			ON
	Keystone	angle and correcting keystone "ON" or "OFF" when the
		projector is tilted vertically.
		This function is only enabled when the "Projection"
		command in the "Extended" menu is set to "Front". If it is set
		to something other than "Front", this menu cannot be
		selected.
	Operation	When set to "ON", the operation of all buttons on the			OFF
	Lock	projector's control panel except for the [Power] button will
		be disabled.
		•When "Operation Lock" is set to "ON", the operation lock
		function can be cancelled by holding down the [Enter]
		button on the projector's control panel for approximately 7
		seconds.
		•If you change the setting, the new setting will take effect
		after exiting the configuration menu.
	Pointer	The shape of the pointer icon that appears when you press			Pointer 1
	Shape	the [Pointer] button on the remote control can be selected
		from the following three shapes.
		Pointer 1:	Pointer 2:	Pointer 3:
	Brightness	This lets you set the lamp brightness to one of two settings.			High
	Control	Select "Low" if the images being projected are too bright
		such as when projecting images in a dark room or onto a
		small screen.
		When "Low" is selected, the brightness of the images is
		reduced, the amount of electricity consumed and noise
		produced during projection are reduced and the lamp's
		operating life is extended.
	Volume	Adjusts the volume.			Median value
					(10)