Epson 821 manual Before Using the Remote Control, Inserting the Batteries, Insert the batteries

Before Using the Remote Control

12

Inserting the Batteries	2 Insert the batteries.
The batteries are not already inserted into the remote control at the time the	Check the positions of the (+) and (–) marks inside the battery
	holder to ensure that the batteries are inserted the correct way.
projector is purchased. You will need to insert the batteries that are
provided with the projector before the remote control can be used.

CAUTION

Be sure to read the Safety Instructions/World-Wide Warranty Terms before handling the batteries.

PROCEDURE
	Replace the battery cover.
3
1 Remove the battery cover.	Press the battery compartment cover until it clicks into place.

While pushing the catch of the battery compartment cover, lift the cover up.

Catch

TIP

If delays in the responsiveness of the remote control occur or if it does not operate after it has been used for some time, it probably means that the batteries are becoming flat. Have two spare AAA-size alkali batteries ready to use when required.