Problems Solving

76

Projection stops automatically

 

 

 

Check

Remedy

 

 

 

 

 

 

 

Is "Sleep Mode" set to "ON"?

When the "Sleep Mode" menu command has been set to "ON", the lamp turns off automatically if

 

 

 

 

 

 

no operations are carried out for about 30 minutes while no video signal is being input. The Power

 

 

 

 

 

 

indicator will flash orange at this time. Press the [Power] button to turn the power on. If you do not

 

 

 

 

 

 

want sleep mode to be used, change the "Sleep Mode" setting to "OFF".

 

 

 

 

 

 

"Extended" - "Operation" - "Sleep Mode" sp.62

 

 

 

 

 

 

 

 

The message "Not Supported." is displayed

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Check

Remedy

 

 

 

 

 

 

 

Are the image signal format settings correct?

If a composite videog or S-Videogsource is connected to the projector, use the "Video Signal"

 

 

 

 

 

 

menu command to select the signal format.

 

 

 

Only when projecting images

 

 

 

 

 

 

 

"Signal" - "Video Signal" sp.57

 

 

 

from a video source

 

 

 

 

 

 

 

 

 

 

Does the mode match the frequency and

Refer to the documentation provided with your computer for details on changing the resolution and

resolution of the image signals?

frequency of the image signals being output from the computer.

 

 

 

 

 

 

"List of Supported Monitor Displays" sp.99

 

 

Only when projecting computer images

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 77
Image 77
Epson 821 manual Projection stops automatically, Is Sleep Mode set to ON?, Message Not Supported. is displayed