Epson 821 manual Problems Solving, Has the Resize been set correctly?, E-Zoomfunction?

Problems Solving

79

Image is truncated (large) or small

	Check	Remedy
Has the "Resize" been set correctly?		Press the [Resize] button on the remote control. sp.47
Is the image still being enlarged by the		Press the [Esc] button on the remote control to cancel the E-Zoom function. sp.48
E-Zoom function?
Has the "Position" setting been adjusted		If analogue RGB images from a computer or RGB video images are being projected, press the
correctly?		[Auto] button on the remote control or the [Enter] button on the projector's control panel to carry out
		automatic adjustment.
		If the images have not been correctly adjusted after using the automatic setup function, adjust the
		setting manually using the "Position" menu command.
		If signals other than analogue RGB images from a computer or RGB video images are being input,
		adjust the setting manually using the "Position" menu command.
		"Signal" - "Position" sp.55, p.57
Has the computer been set for dual display?		If dual display has been activated in the Display Properties of the computer's Control Panel, the
		projector will only project about half of the image on the computer screen. To display the whole of
	Only when projecting computer images
		the image on the computer screen, turn off the dual display setting.
		s Computer video driver documentation
Has the correct resolution been selected?		Set the computer so that the signals that are output are compatible with this projector.
		"List of Supported Monitor Displays" sp.99
	Only when projecting computer images
		s Computer documentation