Epson 821 manual Using the Configuration Menu Functions, As of May

Using the Configuration Menu Functions

63

*EMP Monitor : Allows you to monitor multiple projectors on the network and control them all at once using functions such as turning the power on and off and switching input sources.

To use the EMP Monitor, an adapter and cable for conversion are required. The followings are available products.

(As of May, 2004)

For details on the products, visit LANTRONIX's website.

Adapters:

UDS100, UDS200 (LANTRONIX) Cables:

For the UDS100

RS-232C cable (straight, mini D-Sub9pin female/mini D-Sub25pin male)

For the UDS200

RS-232C cable (cross, mini D-Sub9pin female/mini D-Sub9pin female)

For the detailed and current information about the software, please visit the following website. http://www.epson.co.uk/support/download/

Sub-menu	Function	Default
Standby	Set to "Network ON" to use network monitoring and control	Network OFF
Mode	functions and the standby monitor out function while the
	projector is in standby mode.
	If you change the setting, the new setting will be enabled
	after the power is turned off.
	•We provide softwares* for network monitoring and
	controlling projectors.
	•When set to "Network ON", the Power indicator will flash
	orange and then remain orange after disconnecting the
	power plug and reinserting it into the electrical outlet.
COM Port	This can be set to either "RS-232C" or "USB", depending on	RS-232C
	the port that is being used for communication with a
	computer.
	If you change the setting, the new setting will be enabled
	after the power is turned off.
Language	Sets the language for message displays.	English
	•Press the [Enter] button on the remote control or on the	(Varies
	projector's control panel and then make the selection.	depending on
		country of
		purchase)
Reset	Returns "Display" and "Operation" settings in the	-
	"Extended" menu to their default settings.
	However, if "Background Color" has been set to "Logo" or if
	"Startup Screen" has been set to "OFF", the settings will not
	be returned to their defaults if "User’s Logo Protect" is set to
	"ON". sp.29
	•Press the [Enter] button on the remote control or on the
	projector's control panel.
	•To return all settings such as the "Image" and "Signal"
	menu settings to their default values, select "Reset All"
	from the "Reset" menu. sp.65