Daewoo KOC-1B0K0S service manual To remove Rear heater assembly parts

✔Caution: In this Service Manual, some parts can be changed for improving, their performance without notice in the parts list. So, if you need the latest parts information, please refer to PPL(Parts Price List) in Service information Center(http://svc.dwe.co.kr)

12.To remove Rear heater assembly parts.

					1
					2
					18
					17
					16
				14	15
				13
12
					3
					4
					5
11	10	9	8	7	6

REF.NO	PART CODE	PART NAME	DESCRIPTION	Q’T	REMARK
				Y
1	7112401011	SCREW TAPPING	T1 TRS 4X10 MFZN	1
2	3511407300	COVER MOTOR *B	SBHG T0.6	1
3	7112401011	SCREW TAPPING	T1 TRS 4X10 MFZN	2
4	3511407400	COVER *B	SBHG T0.6	1
5	3512766900	HARNESS CONVECTION-B	KOC-1B0K0S	1
6	3512803800	HEATER MIRACLON	115V 550W 270MM	2
7	3511407700	COVER HEATER *B	SA1D T0.5	1
8	7113400814	SCREW TAPPING	T1 BIN 4X8 MFNI	3
9	7400104011	WASHER PLAIN	PW-1-4 MFNI	1
10	3511800700	FAN CONVECTION	SA1D T0.5	1
11	7S627W50X1	NUT HEX	NUT FLANGE M5X0.8P MFZN	1
12	3512766800	HARNESS CONVECTION-A	KOC-1B0K0S	1
13	7601400811	SCREW MACHINE	PAN 4X8 PW MFZN	2
14	3513302900	INSULATOR HEATER *B	SA1D T0.5	1
15	7113400814	SCREW TAPPING	T1 BIN 4X8 MFNI	4
16	3963514300	MOTOR SHADED POLE	230V 50Hz MW10CA-T02	1
17	3511800800	FAN	PP GF20	1
18	7402704600	RING-C	CR-5 SK5	1

(1)Remove a screw 1 and then pull out Cover motor *b 2 .

(2)Remove two screws 3 and thenpull out Cover *b 4 .

(3)Pull out the Harness convection-b 5 .

(4)Remove four screws 15 and then pull out the Rear heater assembly.

(5)Remove a Nut 11 and then pull out the Fan convection 10 and Washer plain9 .

(6)Remove three screws 8 and then separate the Cover heater *b 7 and the Insulator heater *b14 .

(7)Pull out two Heaters 6 from the the Insulator heater *b14 .

(8)Remove two screws13 and then separate the Insulator heater *b 14 and Motor shaded pole 16

(9)Remove the Ring-c 18 and then pull out the Fan 17 from Motor shaft.

(10)Reverse the above steps for reassembly.

15