KEEP THE OVEN CLEAN

 

 

 

%

More

Less

Clock

Language

Memory

Cake

Crusty

Auto Cook

 

M/W

 

 

GRILL

 

 

COMBI

CONVECTION

 

AUTO DEFROST

e

Weight

Qua

 

ntit

T i m

 

y

STOP/CLEAR

 

START/

 

 

SPEEDY COOK

Note:

Do not use any other Turntable in the oven. Do not operate the oven without the Turntable and Rotating Base Properly in place.

DOOR

While the oven door is still warm, any spatters or food soils should be wiped off with a damp sudsy cloth or sponge. Rinse with water and wipe dry with a cloth.

If steam or condensation appears around this area, wipe with a cloth. This may occur when the oven is operating under high humidity and with foods containing lots of moisture. This is a normal part of microwave cooking.

INSIDE THE OVEN

The interior three side walls and floor are stainless steel.

For easy cleaning, wipe spills and spatters as they occur with a damp cloth or sponge with water and a mild detergent. Rinse the cavity of any cleaning residue with a clean damp or sponge after cleaning. Dry with a soft cloth.

These areas can also cleaned by using plastic or nylon scouring pads recommended for use of Teflon and Silverstone*.

For hard to remove soil, use a mild non-abrasive cleaner. Use on the stainless steel areas, turntable and rotating base only.

FLOOR

A grill element is installed under the floor, and there are holes on the floor over the grill. Therefore, you must be very careful not to drop any waterdrops or spills over the holes. Do not wipe the holed-surface with a damp cloth or detergent Only use soft, clean and dry cloth.

When you clean the groove or floor with a damp cloth, you need to be careful not to touch the holed-surface.

TOP SURFACE

Two quartz grill elements are installed on the top surface. As they are fragile, be careful not to press or grip them hard. Do not remove the grill elements to clean the surface.

Warning

Just as your traditional oven becomes hot also this oven will become hot during use of the grill functions or in combination with microwaves. children should be supervised at all times when using the oven.

TURNTABLE AND ROTATING BASE

These two parts are easily removable for cleaning. The turntable should be cleaned frequently and is dishwasher proof. If food spills are accumulated under the rotating base, the oven will not operate efficiently. Be sure to wipe up any spills as they occur in this area.

Clean these parts as described in by the same method of cleaning inside the oven. Be sure to properly reinstall these parts into the cavity affer cleaning.

Note:

Although your oven is provided with safety features, it is important to observe the following:

1.It is important not to defeat or tamper with safety interlocks.

2.Do not place any object between the oven front face and the door or allow residue to accumulate on sealing surfaces. Wipe the sealing area frequently with a mild detergent, rinse and dry. Never use abrasive powers or pads.

3.When opend, the door must not be subjected to strain, for example, a child hanging on an opend door or any load could cause the oven to fall forward to cause injury and also damage to the door. Do not operate the oven if it is damaged, until it has been repaired by a service technician. It is particulary important that the oven closes propery and that there is no damage to the:

1)Door(bent)

2)Hinge and Hookes(broken or loosened)

3)Door seals and sealing surface.

4.The oven should not be adjusted or repaired by anyone except a properly trained service technician.

EXTERIOR

CONTROL PANEL

Excercise care when cleaning this area. To clean, wipe the panel with a slightly dampened cloth, using only water. Wipe dry. Do not scrub this area or use any sort of chemical cleaner. Avoid use of excess water.

OUTSIDE SURFACE

The outside surfaces should be cleaned with soap and water, rinsed and dried with a soft cloth. Do not use any type of household or abrasive cleanser.

Note:

DO NOT USE ANY TYPE OF OVEN CLEANER ON ANY PART OF THE OVEN. It will damage some of the interior and exterior surfaces of the oven.

In order to keep the good condition of your oven, clean the inside after each cooking.

Failure to maintain the oven in a clean condition could lead to deterioration of the surface that could adversely affect the life of the appliance and possibly result in a hazardous situation.

28

Page 29
Image 29
Daewoo KOC-1B4K owner manual Keep the Oven Clean

KOC-1B4K specifications

The Daewoo KOC-1B4K, a next-generation armored vehicle developed by Daewoo Defense Systems, represents a technological leap in military transport and combat capabilities. Designed to meet the demanding needs of modern warfare, this vehicle combines advanced armor protection, cutting-edge technology, and impressive mobility.

One of the key features of the KOC-1B4K is its multi-layered armor system. The vehicle is designed to withstand small arms fire, shrapnel, and even heavier projectiles, ensuring the safety of its occupants in hostile environments. The armor can be augmented with additional modules for enhanced protection, allowing it to adapt to various threats faced on the battlefield.

Powering the KOC-1B4K is a robust engine that provides exceptional mobility across diverse terrains. The vehicle is equipped with an advanced suspension system that allows for smooth operation on rough ground, making it suitable for both urban and off-road environments. The high ground clearance and powerful drivetrain also enable it to navigate obstacles efficiently and conduct operations in challenging conditions.

In terms of technology, the KOC-1B4K includes an integrated communication system that facilitates secure and reliable communication among the crew and with command units. This system is vital for coordinating missions and ensuring situational awareness on the battlefield. Additionally, the vehicle features advanced navigation systems, including GPS and inertial navigation, which enhance its operational effectiveness during missions.

Armament on the KOC-1B4K is adaptable, allowing for various configurations depending on mission requirements. Typically, it can be equipped with a remote-controlled weapon station, which may include machine guns or automatic cannons. This feature enables the crew to engage targets while remaining protected inside the vehicle.

The spacious interior of the KOC-1B4K can accommodate a small team of soldiers along with their equipment. The ergonomic design of the cockpit and the use of advanced displays and controls enhance crew comfort and operational efficiency. Furthermore, the vehicle is equipped with advanced detection and targeting systems that improve engagement capabilities and enhance combat effectiveness.

Overall, the Daewoo KOC-1B4K stands out as a formidable armored vehicle that embodies the fusion of protection, mobility, and advanced technology. Its versatile design ensures that it meets the diverse operational requirements of modern armies, making it a valuable asset on the battlefield. With its innovative features and robust characteristics, the KOC-1B4K is set to redefine standards in military armored vehicles.