Daewoo SG-9210P instruction manual VCR Playback, If you want to stop playback, press Stop button

DC-G8GD1P-JL (DESUK) 2006.4.19 9:42 AM ˘ ` 21

VCR Playback

If the product, which has a auto-detector, detects a contaminated head(s), it shows the conditions to notice the contamination on screen.

*In case of the notice on screen, please rub the heads with a head-cleaner followed by “How to use a head- cleaner”.

1	Press [ ] button to power on.
	Press [VCR] button of remote control to change to VCR mode.

2Insert the desired tape.

If you want to playback, press [PLAY/PAUSE] button.

3When the operational status is flickering, adjust [TRACKING +/-] button.

4	To stop it, press [	] button.	Basic
			Operation
	If you want to stop playback, press [STOP] button.
5	Press [EJECT] button on the front part of the unit or [OPEN/CLOSE]
	button on remote control to eject the tape.

Various Playback Methods

■If you want fast forward (or reverse) playback, press [√√] or [œœ ] button in Playback mode. You can watch fast playing cue/review (rewinding) on screen.

*NOTE: You might see no colour and a noise band when you fast forward (or reverse) playback the tape which is recorded in LP mode.

■If you want Still picture, press [PLAY/PAUSE] in Playback mode. You can watch the desired scene in pause status.

■If you want slow-motion playback, press [√√] button in Pause mode. You can watch the desired scene in the slow forward (cue) playback.

*NOTE: VCR doesn’t have Slow Reverse Playback function.

■If you want to watch a series of screens one by one, (FRAME ADVANCE) press [NEXT √√❚] button in Pause mode. Each time you press this button, the picture advances by one frame.

■If you press [REPLAY] button in playback mode, the player quickly rewinds 15 seconds of the tape and plays it again.

■If you press [CM SKIP] button in playback mode, the player quickly skips 30 seconds of the tape and then reverts to play again.

To Adjust Display

This product includes an automatic Tracking feature and enables users to enjoy clear pictures without any additional operation. Provided that the following problems can be solved by manual adjustment, which improves display quality. (During automatic picture adjustment, “Adjusting Display” is displayed on TV screen.)

-If the picture is poor in Playback mode,

-If noises occur in the upper or lower part of the picture in slow playback (cue) mode,

-If paused picture vibrates up and down.

Use [TRACKING +/-] buttons of remote control to adjust the display for optimum viewing.

21