Daewoo SG-9210P Timer Review changing and erasing, Confirm changes with OK. Exit the menus

DC-G8GD1P-JL (DESUK) 2006.4.19 9:42 AM ˘ ` 28

Timer Recording

Timer Review – changing and erasing

Call up the player’s "SETUP" menu, choose "TIMER PROGRAM".

1

Select the programming you wish to change or erase.

2If you want to erase this programming press button [0], confirm with OK.

If you wish to make changes:

Move to the position you want to change using the [œ /√] buttons.

Change the settings using the [PR +/–] or [number] buttons.

If all settings are ok, press [œ or √ ], until you see "OK: CONFIRM" in the bottom line.

Confirm changes with [OK]. Exit the menus.

TIMER PROGRAM

PR	START	END	DATE
03	21:20	22:20	13/05
01	18:10	20:30	19/05
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
--	-- : --	-- : --	-- / --
PR+/-:SELECT
OK:CONFIRM		SETUP:END

TIMER PROGRAM (ONCE)

PR	03
START TIME	21:20
END TIME	22:20
START DATE	13/05(SAT)
TAPE SPEED	SP
VPS/PDC	ON
0 :ERASE
➝/➝ :CORRECT	SETUP:END

•VPS/PDC is a service provided by some stations to enable you to perform timer recordings precisely even if the broadcaster delays the start time of the programme slightly. The time you enter is the VPS/PDC time so must be correct. Not all stations offer VPS/PDC, in which case the player will start at the time you enter and not the actual start time of the programme.

If you wish to start recording at a specific time without it being adjusted by the VPS/PDC system in the event of a delay, switch VPS/PDC off otherwise the player will not record at the preset time.

28