Danby ADR3006, ADR4066 Composants de l’appareil, Tableau de, Poignée, Commande, Roulettes

Models: ADR3006 ADR4066

1 14
Download 14 pages 39.38 Kb
Page 9
Image 9
CARACTÉRISTIQUES

CARACTÉRISTIQUES

Clavier de commande tactile (électronique)

Auto-détection de l’hygrométrie ambiante

Réglage selon l’hygrométrie ambiante (35% - 80%)

Ventilateur à 2 vitesses (Haut/Bas)

Mise en marche temporisée - protection (compresseur)

Auto-dégivrage

Témoin « réceptacle plein »

Roulettes pour déplacement facile (4)

Réservoir d’eau situé sur l’avant (amovible)

Option de drainage direct (tuyau pas compris)

Fonctionnement silencieux

Filtre à air amovible

KEY PAD FUNCTIONS.

 

8

60

1

 

2

3

6

7

 

4

 

5

 

 

Composants de l’appareil

 

Tableau de

 

 

 

 

 

 

Poignée

 

 

 

 

Commande

 

 

 

 

 

 

 

 

Panneau de

Façade

Filtre à Air

Entrée d’Air(Panneau Latéral)

1.LED Readout (ROOM HUMIDITY): The LED window displays the following information independently;

A.Internal (Room Environment) Relative Humidity Conditions.

B.Set Operating Relative Humidity Value.

NOTE: The LED readout is programmed to default to display the ambient (room environment) relative humidity conditions.

To view the Set Operating Relative Humidity Value, (2.) press the “up” or “down” button (once) and the set RH operating value will flash for approximately 5 seconds in the LED window, then revert back to display the internal (room environment) RH value.

2.ON/OFF Button : Each time this button is pressed the unit turns On (adjacent indicator light illuminates) or Off (adjacent indicator light is not illuminated).

4.HUMIDITY UP: This button allows you to increase the relative humidity setting. Each time this button is pressed the RH value setting is increased incrementally by 5%. (ranging from 35% ~ 80%)

5..HUMIDITY DOWN: This button allows you to decrease the relative humidity setting. Each time this button is pressed the RH value setting is decreased incrementally by 5%. (ranging from 80% ~ 35%)

6.HIGH FAN: The adjacent (green) indicator light illuminates when HIGH FAN is selected.

7.LOW FAN: The adjacent (green) indicator light illuminates when LOW FAN is selected.

8.WATER FULL INDICATOR: This (red) light illuminates under the following conditions;

Réservoir d’Eau

Indicateur de Niveau

d’Eau

Roulettes

3.CONTINUOUS: Used for Continuous Dehumidifier Operation. (unit will run non-stop) NOTE: Humidity values (settings) cannot be programmed in this mode. The adjacent (green) indicator light illuminates to signify the ‘continuous’ mode is currently in operation.

A. When the internal water tank is not properly installed inside the cabinet.

B. When the internal water tank is full. The Water tank must be emptied and replaced back in the cabinet before normal operating conditions can resume.

17

7

Page 9
Image 9
Danby ADR3006, ADR4066 Composants de l’appareil, Tableau de, Poignée, Commande, Panneau de Façade Filtre à Air, Roulettes