Remote Control Features
Electronic Display: Displays the following information;
A:Remote Control power On/Off and Mode Icons
B:Clock and
C:Current set temperature
D:Fan speed setting
Control Buttons
1. | Power switch. |
2. | Mode |
Electronic
Display 
A
BC
D | 1 |
|
2
| 3 |
| MODE |
4 | 5 |
3. Fan Speed |
6
© 7
4. Energy Saver
8
9
5.
6.Used to increase 
or decrease 
temperature settings in 1° increments on the Celsius or Fahrenheit scale.
7.Cancels current Timer ON/OFF settings.
8.Lock 
prevents the remote control settings from inadvertently being changed.
9.Clock: Depress the button for 3 seconds in order to set the clock. Press the increase or decrease arrow to adjust the clock in 1 minute intervals, holding down the increase or decrease arrow will adjust the time in 10 minute intervals.
10.Used to activate the SLEEP program.
11.Toggle the LED backlight on/off.
12.Restore remote control default settings.
11
10 | 12 |
|
To operate the hand held remote control will require two “AAA” Alkaline batteries (included ).
Batteries should be replaced when:
a)No signal (beep) is heard when attempting to program the main unit.
b)The main unit does not respond to a command
issued by the remote control.
Battery replacement:
1.Slide the rear cover on the remote in the direction of the arrow. Continue pulling (gently) until the cover separates completely from the unit.
2.Insert (2) batteries (AAA) following the same orientation (polarity) depicted inside the battery
3.
4.If the remote control will not be used for extended periods of time (vacations etc.), batteries should be removed.
The remote operates within a range of 8 meters
(26 ft.) from the receiver located inside the main unit. Any obstruction between the receiver and remote may cause signal interference, limiting the ability to program the main unit.
8
