INSTALLATION INSTRUCTIONS
FEATURES
A) Slide out wire shelves
(Number and type of shelves depends on the model) Shelves can be arranged on any of the ralis inside the appliance. It is protected against being pulled out accidentally. If you want to remove a shelf, slightly lift up the front part and pull it out.
Perishable foods should be stored towards the back/rear of the shelves.
B) Door Liner
The door liner consists of various shelves or holders used for storing eggs, cheese, butter and yogurt as well as other smaller packages, tubes, cans etc. The lower shelf is used for storing large bottles.
C) Defrost Water Outlet
The interior of the refrigerator is cooled with a cooling plate mounted in the rear wall. Under the plate there is a channel and an outlet for defrost water. Regularly check the defrost water outlet and the drain channel for blockage. They should always be kept free and clear of food particles. If the drain outlet does become clogged, use plastic straw to clear it.
| A |
| B |
CHANGING THE DIRECTION ON | C |
THE DOOR SWING |
|
If you find the direction of openeing the door on your appliance inconvenient, you can change it. Holes on the opposite side have already been prepared in the factory. See figure below for a guide to the components that must be removed and switched to the other side.
4 |